Noticias recientes
A new terminal at Alicante Airport is currently being built by Acciona - Elecnor and Ecisa. Model 145 Goujon Crete sliding pins have been placed which would reach a shear breakage point of 410,90 KN.
On the other hand, couplers Zap Screwlok type mechanical screw bar are being mounted to link 32 mm diameter bars. This model avoids overlapping lengths.
In reply to the changing needs of the Civil Works market and the increase in the number of Civil Works projects in Spain, Edinger APS introduces its new range of products, renown for the company's application of new technologies and high final quality.
Edinger APS distributes a wide range of bridge deck moving joints reaching a moving range of up to 2,000 mm. Optionally, we can produce the joint with sinusoidal plates, which significantly reduces noise emissions - this is greatly appreciated if we are near urban areas.
http://www.elcorreogallego.es/popImprimir.php?idWeb=1&idNoticia=268743
Torre Iberdrola in Bilbao is currently under construction. This is a 41 floor building boasting a 50,000 m2 of surface area. To avoid duplicating pillars in the expansion joints, the construction solution encompassing high load transmitting pins GOUJON CRET is going to be implemented. The traditional system of bar overlaps is to be replaced by the mechanical splice bar according to EHE 66.6.6 through the mechanical splice bar that allows BPI BARGRIP which allows pressing the bars manually with a machine on-site, meeting EHE Spanish regulations.
A pesar de los problemas iniciales surgidos, El Corte Inglés de Salamanca continua sus obras. En el Proyecto se está aplicando la solución de transmisión de cargas elevadas GOUJON CRET para suprimir dobles pilares en las juntas de dilatación del Edificio.
Debido a las continuas discrepancias en la entrada en tablas de cargas de cualquier tipo de pasador de transmisión de cargas en juntas de dilatación que existen en el mercado, queriamos informar a Ingenieros y Arquitectos Proyectistas, que para conocer el esfuerzo cortante resistido por cada modelo de pasador se debe tener en cuenta los siguientes coeficientes de seguridad que se aplicarán o no según cada caso:
