Manguitos de empalme de barras
BPI BUTTONHEAD
BPI Buttonhead is a headed end for anchorage of reinforcing bars installed by octogonal dies with press machine to produce a 5Ab head size
BPI DOUGHNUT
Mechanical Reinforcing Bar Anchorages shall be the cold-swaged taper-threaded coupler type, which shall be assembled with 5As or 10As Heads
BPI BARSPLICER
DOWEL BAR SPLICE Dowel bar Replacement Or Dowel Bar Substitute. BPI® Barsplicer Setting & Splice Bars and/or BPI® Barsplicer Position Setting & Splice Bars
Dowel bar splices at construction joints shall be procured with ISO 9001 certification, pre-tested to develop at least 1.25 fy Grade 60, and consist of threaded setting and splice bars [configured as shown on plans] having standard unified NC threads, flanged couplers and/or position couplers.
BPI GRIP TWIST
BAR-TO-BAR. Taper-Threaded Grip Twist® and/or Grip-Twist® Position Couplers
Mechanical splices shall be the tension-compression cold-swaged taper-threaded type, comprising male/female couplers, and/or positional couplers, which shall be assembled by rotating the reinforcing bar and/or position coupler stud.
BAR-TO-HEAD. Taper Threaded DoughNUTTM
BPI BAR GRIP
Mechanical Bar Grip type splice bar sleeves that allow a complete traction-compression transmission of efforts using BP 2600 equipment (workshop) or BG400 or BG750M equipment according to diameters (in situ) making several bites at the sleeve.
BPI ZAP SCREWLOK
BAR-TO-BAR mechanical butt splice. Zap Screwlok® Type 2 Series or Epoxy Series or ‘SL' Series
Mechanical butt splices shall be the tension-compression shear screw and wedge coupling sleeve type, with smooth converging sides and cone-pointed hex-head screws, to develop a strength in the bar equal to [state strength requirements].
BAR-TO-BAR mechanical lap splice. Double Barrel Zap Screwlok®
